Samsung TV Remote Codes for Universal Remote

learn all the samsung tv remote codes

Universal remotes can replace the original remote of electronic devices. It can be used to operate any devices at home like Smart TV, DVD player, Blu-ray player, AC, and more. If your Samsung TV remote is not working, you can use any universal remote to control the TV. To use the Universal remote with your Samsung TV, you must connect the remote to your TV with a code. You can get the complete list of universal remote codes for a Samsung TV to pair any remote.

Samsung TV Remote Codes for Universal Remote

When you want to program Universal remote with Samsung TV, you can try the code 0101. If the code is not working, you can use any one of the codes listed below.

3 Digit Samsung TV Remote Codes

523526516505
738506667696
680794652573
647601507265
140627858520
611654989655
833564

Samsung 4 Digit Universal Remote Codes

0370000917441506
0226020802641235
1584163012492137
1619009305870644
0178003721031312
0556061814583131
20510812

5 Digit Samsung Remote Codes

10032100561021710329
10408104271048210587
11060115751003010178
10812107661195910060
13993107021163212050
1081410650

Samsung Remote Codes using Philips Remote

0112030902090512
0302050200020102
0110081808950437
0802010306090012
0212

Samsung TV Remote Codes using One-For-All Universal Remote

0587017800930060003000190056

Related: How to Turn Off Voice on Samsung Smart TV

Samsung TV Remote Codes using GE Universal Remote

0105010601040080
0012035809420015
0172008500050004
0009000701090076
0077

Samsung TV Remote Codes using RCA Universal Remote

4 Digit Codes

1207110311041056
1205106510151083
1194106910251046
1124107811021004
1123101410121009
1013

5 Digit Codes

10812100541006010702
10178100301005610650
107661081411060

Innovage Jumbo Remote Samsung Codes

004005009
105104015
106109172

Samsung Remote Codes using Samsung IR Codes

0051016101810261
0301118115611661
2141239124012551
2791321136013661
3711372137413751
3761377139113921
4091410141114121
4831484151915201

How to Program Samsung TV using Universal Remote

1. Start your Samsung Smart TV and make sure all the connections are proper.

2. Place your remote in a way that it sees the front of the Adapter during setup.

learn the samsung tv remote codes to program universal remote to samsung tv

3. Now, press and hold the PROG button on Adapter’s remote until the LED is turned on.

4. Then, press the INFO button. The LED light will blink slowly to indicate the pairing mode.

5. Enter the Remote Code to connect the Universal remote to your Samsung TV.

6. In case you have entered the wrong code, you will get a message like Sorry, the entry was incorrect.

7. Re-enter the code again to connect the remote to operate the Samsung TV.

Related: Check out the Remote control codes for Sharp TV

Alternate Method to Program Universal Remote

1. Press and hold the PROG button for a few seconds.

2. When you see the red solid light, release the PROG button and press the TV button once. Don’t long-press the TV button on the remote.

3. Enter code 0101. If it is not working, you can try the code listed above.

4. Once you enter the correct code, the LED light will turn off.

Related: How to Adjust Brightness on Samsung Smart TV

Set Up Universal Remote Without a Code

1. On your Universal remote, press and hold the SET button. At the same time, press the Zero button four times.

2. Next, press the ON button for one second and release the button for one second.

3. Repeat the steps until the TV turns off itself.

4. Finally, press OK or Enter.

Hence, you can use the Universal remote with your Samsung TV. You could easily program a Universal remote to Samsung TV with the 3,4, and 5 digit codes. If you have any issues with the above guide, please mention them in the comments section below.

Related: How to Delete Apps on Samsung Smart TV

Frequently Asked Questions

What are the DirecTV remote codes for Samsung TV?

54000 and 0101 are the DirecTV remote codes for Samsung TV.

Can I program Universal remote to Samsung TV?

Yes, you can use the remote codes for programming the Universal remote to Samsung TV.

What is the Samsung TV Remote Code for Dish Remote?

You can press the Home button and select Settings on the Dish Remote. Now, press the code 0101 to pair the remote and control the Samsung Smart TV.